Handleiding
Je bekijkt pagina 8 van 84
Activation of the ECO deactivates Extra
Cool function.
The ECOMETER indicator shows the
appliance's current energy consumption.
Three fully lit bars indicate the most
energy-efficient setup.
3.4 0° Mode settings
The 0° Mode allows you to set different
temperature levels in the LongFresh
compartment.
The default setting is 5. The coldest setting is
1 and the warmest setting is 5.
To change the setting:
1. Tap 0° Mode button until you select the
desired temperature level.
2. The 0° Mode indicator makes a sound
and blinks for 3 seconds.
3. When the 0° Mode indicator stops
blinking, the currently displayed
temperature level activates.
Settings from 1 to 3 are suitable for fish
and meat.
Settings 4 and 5 are suitable for fruit and
vegetables. When those settings are on
the compartment works similarly to the
fridge compartment.
Activation and deactivation of the ECO
function does not modify the settings of
the 0° Mode.
3.5 Door open alarm
The door open alarm indicator turns on with
the sound if the fridge door is left open for 5
min.
The alarm stops after closing the door. Press
any button to switch off the sound and
flashing of the internal fridge light..
If you do not press any button, the sound
switches off automatically after 1 hour.
3.6 Setting mode
The Setting mode allows you to enable or
disable the ECOMETER indicator, to reset
the appliance factory settings and to change
the temperature units from °C to °F.:
Activating the Setting mode
1. Press and hold the ECO button for
approx. 3 sec. The display alternately
shows blinking and .
2. Once the Setting mode is switched on,
the display alternately shows
and .
Press and hold the ECO button for approx. 3
sec to deactivate the Setting mode.
The Setting mode deactivates if you do not
interact with the control panel for 60 sec.
Navigating the Setting mode
Tap the temperature button to change the
parameter.
Tap the Extra Cool button to change the
parameter value.
Display Default parameters
ECOMETER indicator
Button sounds
Temperature units
Factory settings
ECOMETER indicator
In order to switch the ECOMETER on or off:
1. Activate the Setting mode.
2. Tap the Extra Cool button repeatedly to
switch ECOMETER indicator off or on.
The indicator will alternately show
and either for the enabled or for
the disabled ECOMETER indicator.
3. Exit the Setting mode.
Button sounds
8 ENGLISH
Bekijk gratis de handleiding van AEG PCA9000C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | PCA9000C |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7370 MB |
