Handleiding
Je bekijkt pagina 17 van 44
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered
pots.
While cooking with covered pots on multiple
cooking zones or burners, gentle frying.
While boiling and frying big quantities of food
without a lid, cooking on multiple cooking
zones or burners.
While boiling and frying big quantities of food
without a lid, big humidity. After 5 minutes the
appliance returns to previous setting.
It is recommended to leave the hood
operating for approximately 15 minutes
before and after cooking.
Activating the appliance
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
Deactivating the appliance
To turn off the appliance press the
symbol again.
Lighting
The hood lighting works independently to
other hood functions.
Activating and deactivating the lighting
To illuminate the cooking surface touch the
symbol.
5.2 Hob2Hood®
It is a function that connects the hob to a
hood. Both the hob and the hood are
equipped with an infrared signal
communicator. The fan speed is determined
based on the mode setting and the
temperature of the hottest cookware on the
hob. Alternatively, you can manually control
the fan using the hob. This function can be
activated from the hob's control panel.
For more information how to use the
function, refer to the hob user manual.
5.3 Activating Maximum Motor
Speed
When you touch , the Maximum Motor
Speed starts to operate for 5 minutes. After
that time, the appliance returns to its previous
speed settings.
When the function is turned on, additional
touch on does not have any effects.
5.4 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
filter indicator
is turned on for 30 seconds
if the grease filter must be cleaned. The filter
indicator flashes for 30 seconds if the
charcoal filter must be replaced or cleaned.
Refer to cleaning the grease filter in care
and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
To reset the function touch for 3 seconds.
To activate or deactivate function:
1. Switch on the control panel. Make sure
that the panel is on.
ENGLISH 17
Bekijk gratis de handleiding van AEG NVK961DB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | NVK961DB |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3240 MB |
