Handleiding
Je bekijkt pagina 22 van 28
12.1 What to do if...
Problem description Cause and remedy
You cannot activate or operate the
appliance.
The appliance is not connected to an electrical supply or it is connected in‐
correctly.
The appliance does not heat up. The clock is not set.
To set the clock refer to "Clock functions" chapter.
The door is not closed correctly.
The fuse is blown.
Make sure the fuse is the cause of the problem. If the problem recurs, con‐
tact a qualified electrician.
Child Lock is activated.
The lamp is turned off. The lamp is burnt out. Replace the lamp.
For details refer to "Care and Cleaning" chapter.
Trouble with wireless network sig‐
nal.
Check if your mobile device is connected to the wireless network. Check
your wireless network and router.
Restart the router.
New router installed or router con‐
figuration changed.
To configure appliance and mobile device again, refer to "Before first use"
chapter, Wireless connection.
The wireless network signal is
weak.
Move router as close to the appliance as possible.
The wireless signal is disrupted by
microwave oven placed near the
appliance.
Turn off the microwave oven.
Avoid using microwave oven and the Remote operation of the appliance at
the same time. Microwaves disrupt WiFi signal.
12.2 Error codes
When the software error occurs, the display shows error message. You will find the list of
problems in the table below.
Code and description Remedy
F102 - the door is not fully closed or the door lock is
broken.
1)
Close the door.
Turn the appliance off and on.
F111 - Food Sensor is not correctly inserted into the
socket.
Fully plug Food Sensor into the socket.
F240, F239 - the touch fields on the display do not
work properly.
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
F908 - the appliance system cannot connect with the
control panel.
Turn the appliance off and on.
F131 - the temperature of magnetron sensor is too
high.
1)2)
Turn the appliance off and wait until it cools down. Turn
the appliance on again.
F602, F603 - Wi-Fi is not available.
1)2)
Turn the appliance off and on.
1)
When the following error message continues to appear on the display, it means a faulty subsystem may have
been disabled. In such a case contact your dealer or an Authorized Service Centre.
2)
If one of these errors occurs, the rest of the appliance functions will continue to work as usual.
22 ENGLISH
Bekijk gratis de handleiding van AEG NKK9A801B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | NKK9A801B |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2393 MB |
