Handleiding
Je bekijkt pagina 16 van 80
Flex Bridge Standard mode
This mode is activated by default when you
activate the function. It connects the sections
into two separate cooking areas. You can set
the heat setting for each area separately. Use
the two control bars on the left side.
Correct cookware position:
Incorrect cookware position:
Flex Bridge Big Bridge mode
To activate the mode press until you see
the correct mode indicator
. This mode
connects the three rear sections into one
cooking area. The front section is not
connected and operates as a separate
cooking zone. You can set the heat setting for
each area separately. Use the two control
bars on the left side.
Correct cookware position:
Make sure to place the cookware on the three
connected sections. If you use cookware
smaller than two sections the control bar
blinks and after 2 minutes the zone
deactivates.
Incorrect cookware position:
Flex Bridge Max Bridge mode
To activate the mode press until you see
the correct mode indicator . This mode
connects all sections into one cooking area.
To set the heat setting use any of the two
control bars on the left side.
16 ENGLISH
Bekijk gratis de handleiding van AEG NIK95I00FZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | NIK95I00FZ |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7137 MB |
