Handleiding
Je bekijkt pagina 20 van 48
12.1 What to do if...
Problem description Cause and remedy
You cannot activate or operate the
appliance.
The appliance is not connected to an electrical supply or it is connected in‐
correctly.
The appliance does not heat up. The clock is not set.
To set the clock refer to "Clock functions" chapter.
The door is not closed correctly.
Lamps / symbols for the hob
The fuse is blown.
Make sure the fuse is the cause of the problem. If the problem recurs, con‐
tact a qualified electrician.
Child Lock is activated.
The lamp is turned off. The lamp is burnt out. Replace the lamp.
For details refer to "Care and Cleaning" chapter.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.
Trouble with wireless network sig‐
nal.
Check if your mobile device is connected to the wireless network. Check
your wireless network and router.
Restart the router.
New router installed or router con‐
figuration changed.
To configure appliance and mobile device again, refer to "Before first use"
chapter, Wireless connection.
The wireless network signal is
weak.
Move router as close to the appliance as possible.
The wireless signal is disrupted by
microwave oven placed near the
appliance.
Turn off the microwave oven.
Avoid using microwave oven and the Remote operation of the appliance at
the same time. Microwaves disrupt WiFi signal.
12.2 Error codes
When the software error occurs, the display shows error message. You will find the list of
problems in the table below.
Code and description Remedy
C2 - the Food Sensor is in the appliance cavity during
Pyrolytic cleaning.
Take out the Food Sensor.
C3 - the door is not fully closed during Pyrolytic clean‐
ing.
Close the door.
F111 - Food Sensor is not correctly inserted into the
socket.
Fully plug Food Sensor into the socket.
F240, F439 - the touch fields on the display do not
work properly.
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
F601 - there is a problem with Wi-Fi signal. Check your network connection. Refer to "Before first
use" chapter, Wireless connection.
F604 - the first connection to Wi-Fi failed. Turn the appliance off and on and try again. Refer to
"Before first use" chapter, Wireless connection.
20 ENGLISH
Bekijk gratis de handleiding van AEG NBE7P731AB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | NBE7P731AB |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4574 MB |
