AEG LWX60846B handleiding
Handleiding
Je bekijkt pagina 11 van 44
contact the authorized service center for
information to replace the hose.
3/4”
3/4”
A
A
A
5. Connect the other end of the COLD water
inlet hose to the cold water tap with 3/4"
thread.
WARNING!
The inlet water shall not exceed 25 °C.
Water drainage
The drain hose should stay at a height of no
less than 60 cm and not more than 100 cm.
You can extend the drain hose to
maximum 400 cm. Contact the
authorised service centre to buy the other
drain hose and the extension.
It is possible to connect the drain hose in different ways:
min.600 mm
max.1000 mm
(
*
)
(
*
)
(
*
)
* Subject to change spare parts without notice.
Make sure that the drain hose makes a loop
to prevent particles going into the appliance
from the sink.
Connect the drain hose to the spigot and
tighten it with a clamp. Make sure that the
drain hose makes a loop to prevent particles
going into the appliance from the sink.
Position the hose directly to a built-in drain
pipe in the room wall and tighten it with a
clamp.
The drain hose can be bent into U shape and
put around the plastic guide. On the edge of a
sink - Fasten the guide to the water tap or to
the wall.
ENGLISH 11
Bekijk gratis de handleiding van AEG LWX60846B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LWX60846B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3676 MB |
