AEG LWR8516L6UD handleiding
Handleiding
Je bekijkt pagina 39 van 60
In some washing programmes, you can
combine WASH and DRY mode for running a
complete wash&dry programme. Proceed as
follows:
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in the
appropriate compartment.
4. Turn the programme dial to the washing
programme. The display shows the
default temperature and spin. If
necessary, change them according to
your laundry. The display also shows the
maximum recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Touch the DRY mode button once to
activate also the drying function. The leds
of the WASH and DRY indicators come
on. The indicators and
appear in the display. The display also
shows the maximum recommended load
for a washing and drying programme (e.g.
7 kg for cottons).
When drying a large laundry load, make
sure that the garments are not rolled up
and that are uniformly distributed in the
drum.
13.2 Washing and Drying -
Automatic levels
The default level is the cupboard dry
one. In some programmes you
can change the drying level.
1. Tap on the Auto Dry button repeatedly
until the display shows the required
dryness level. The indicators in the
display illuminate accordingly:
a.
Iron dry: for cotton items;
b. Cupboard dry: for cotton
and synthetic items;
c.
Extra dry: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying.
To have a good drying by using less
energy and in a shorter time, the
appliance does not let you set a too low
spin speed for the items to be washed
and dried.
2. Touch the Start/Pause button to start
the programme. The ProSense estimation
starts.
In the display the door locked
indicator
goes on, the indicator of the running phase
starts flashing.
The display also shows the remaining
programme time.
13.3 Washing and Timed Drying
You can also exclude the automatic drying
mode, and choose a drying time manually:
1. Tap on the Time Dry button repeatedly to
set the desired time value (see the
"Timed drying" table in the "Programmes"
chapter). The Auto Dry l indicator goes off
and the indicator comes on.
The minimum timed drying is 10 minutes.
Each time you tap on this button the time
value increases by 5 minutes. The display
shows the set new time value.
2. Touch the Start/Pause button to start
the programme. The ProSense estimation
starts.
In the display the door locked indicator
comes on and the indicator of the running
phase starts flashing.
The display also shows the remaining
programme time.
13.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they are
active).
• In the display comes on.
ENGLISH 39
Bekijk gratis de handleiding van AEG LWR8516L6UD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LWR8516L6UD |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5500 MB |
