AEG LWR8516L6UD handleiding
Handleiding
Je bekijkt pagina 36 van 60
12.6 Starting a programme with the
Finish In option
1. Touch this repeatedly until the display
shows the desired time within the
programme should end. The indicator
comes on.
2. Touch the Start/Pause button.
3. The appliance starts the countdown to the
end of the programme and the
programme will start at the right moment
for ending at the time set through this
option.
To change or cancel this option:
1. Switch the appliance off by means of the
On/Off button.
2. Switch the appliance on again.
3. Set the programme again.
12.7 The ProSense load detection
The programme duration in the display is
referred to a medium/high load.
After setting a washing programme, the
icon lights up on the display if the
programme supports it.
After touching the Start/Pause
button, the
ProSense starts the laundry load detection:
1. The appliance detects the load in the first
30 seconds: the indicator flashes, the
bars under the
icon move back
and forth and the drum rotates shortly.
2. When the drum stops rotating, the display
shows the new programme duration, that
could increase or decrease, adjusted
accordingly the load detected, the
number of bars indicates the load in
quarter (from 1 to 4, 4 bars in case of
overload), the maximum declared load
indicator comes on again. After further 30
seconds, the water filling starts.
In case of in case of drum overload,
the maximum declared load indicator
comes on again with the
indicator blinking. In this case, during
these 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding
garments, touch the Start/Pause
button to start the programme again.
The ProSense phase can be
repeated up to three times (see point
1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense detection is carried out
with complete washing programmes only
(no skipping phase selected).
The ProSense is not available with some
programmes, such as Wool/Handwash,
programmes with short cycles and
without washing phase.
12.8 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
.
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
36 ENGLISH
Bekijk gratis de handleiding van AEG LWR8516L6UD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LWR8516L6UD |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5500 MB |
