AEG LWR7116O4B handleiding
Handleiding
Je bekijkt pagina 11 van 52
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in the
user manual bag, in the holes.
We recommend that you keep the
packaging and the transit bolts for any
movement of the appliance.
5.2 Installation on suspended
flooring
Suspended wooden floors are particularly
susceptible to vibration.
To limit vibration we recommend placing a
waterproof wooden panel, at least 15 mm
thick, under the appliance. It should be
screwed to at least 2 floor beams and should
extend beyond the front feet.
If possible, install the appliance where the
floor is more stable.
5.3 Positioning and levelling
1. Install the appliance on a flat hard floor.
Make sure that carpets do not stop the
air circulation below the appliance.
Make sure that the appliance does not
touch the wall or other units.
2. Loosen or tighten the feet to adjust the
level.
WARNING!
Do not put cardboard, wood or equivalent
materials below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the appliance
level prevents the vibration, noise and
the movement of the appliance when in
operation.
When the appliance is installed on a
plinth, use the accessory described in
chapter 'Accessories'. Read carefully the
instructions supplied with the appliance
and with the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the back
of the appliance if needed. Usually, it is
ENGLISH 11
Bekijk gratis de handleiding van AEG LWR7116O4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LWR7116O4B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4444 MB |
