AEG LR7FH94DG handleiding
Handleiding
Je bekijkt pagina 27 van 88
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators come on in the display and the
given information changes accordingly.
In case a selection is not possible an
acoustic signal sounds.
11.7 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator .
The drain pump can operate shortly
before the appliance fills water.
11.8 Starting a programme with the
Finish In option
1. Touch this repeatedly until the display
shows the desired time within the
programme should end. The indicator
comes on.
2. Touch the Start/Pause
button.
The drum starts rotating to perform the
ProSense estimation, if foreseen in the
selected programme.
3. The appliance starts the countdown to the
end of the programme and the
programme will start at the right moment
for ending at the time set through this
option.
To change or cancel this option:
1. Switch the appliance off by means of the
On/Off button.
2. Switch the appliance on again.
3. Set the programme again.
11.9 The ProSense load detection
The programme duration in the display is
referred to a medium/high load.
After setting a washing programme, the
icon lights up on the display if the
programme supports it.
After touching the Start/Pause button, the
ProSense starts the laundry load detection:
1. The appliance detects the load in the first
30 seconds: the indicator flashes, the
bars under the icon move back
and forth and the drum rotates shortly.
2. When the drum stops rotating, the display
shows the new programme duration, that
could increase or decrease, adjusted
accordingly the load detected, the
number of bars indicates the load in
quarter (from 1 to 4, 4 bars in case of
overload), the maximum declared load
indicator comes on again. After further 30
seconds, the water filling starts.
In case of drum overload, the
maximum declared load indicator
comes on again with the
indicator blinking. In this case, during
these 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding
garments, touch the Start/Pause
button to start the programme again.
The ProSense phase can be
repeated up to three times (see point
1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
ENGLISH 27
Bekijk gratis de handleiding van AEG LR7FH94DG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LR7FH94DG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8234 MB |
