AEG LR7FG84B4 handleiding
Handleiding
Je bekijkt pagina 23 van 72
10.6 Additional information about
daily use
The ProSense load detection
The appliance detects the load in the first 30
seconds, during detection the indicator
flashes. The indicator stop flashing at the end
of load detection.In case of drum overload,
the indicator is flashing in the display:
It is possible to pause the appliance and
remove the exceeding garments. If the
laundry amount will not be reduced, the
washing programme starts anyway. About 20
minutes after the programme start, the
programme duration could be adjusted again
depending on the capacity of water
absorption of the fabrics. The ProSense
Technology is not available in programmes
with short cycles.
Starting a programme
Touch the Avvio/Pausa button to start the
programme. The related indicator stops
flashing and stays on. The programme starts,
the door is locked. The display shows the
indicator
.
Starting a programme with delay start
1. Touch the Partenza Ritardata button
repeatedly until the display shows the desired
delay time.
2. Touch the Avvio/Pausa button. The
appliance door locks and starts the
countdown of the delay start. When the
countdown is completed, the programme
starts automatically.
Interrupting a programme and changing
the options.
1. When the programme is running, you can
change only some options. Touch the Avvio/
Pausa button.
2. Change the options. The given information
in the display changes accordingly.
3. Touch the Avvio/Pausa again. The
washing programme continues.
Cancelling a running programme
1. Press the button On/Off button to cancel
the programme and to deactivate the
appliance
2. Now, you can set a new washing
programme. Press again to activate the
appliance.
Opening the door - adding garments
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the Avvio/Pausa button
2. Open the appliance door. If necessary, add
or remove the items.
3. Close the door and touch the Avvio/Pausa
again. The programme or the delay start
continues.
End of the programme
1. The appliance stops automatically. The
acoustic signals operate (if they are active).
2. The indicator of the Avvio/Pausa button
goes off. The door unlocks and the indicator
goes off .
3. Press the On/Off button to deactivate the
appliance. Keep the door and the detergent
dispenser slightly ajar to prevent mildew and
odours.
Draining water out after end of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse you must remember to drain the water
to open the door.
1. Touch button Avvio/Pausa.
• If you have set , the appliance drains
the water and spins.
• If you have set , the appliance only
drains the water.
2. Touch button Centrifuga to decrease the
spin speed proposed by the appliance When
the programme is completed and the door
locked indicator goes off, you can open
the door.
3. Press the On/Off to deactivate the
appliance.
Stand-by function
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption.
ENGLISH 23
Bekijk gratis de handleiding van AEG LR7FG84B4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LR7FG84B4 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6797 MB |
