AEG LR7FD104V handleiding
Handleiding
Je bekijkt pagina 19 van 96
To activate/deactivate this option, hold down
the Flecken/Vorwäsche button until comes
on/goes off on the display.
The appliance will default to this option after
you switch it off.
The Child Lock function may not be available
for a few seconds after switching the
appliance on.
8.4 Permanent Extra Spülen
With this option you can permanently have an
extra rinse phase, if available with selected
cycle, when you set a new programme.
• To activate/deactivate this option touch
the Extra Spülen and the Zeit Sparen push
buttons simultaneously until the indicator
above the Extra Spülen push button and
the corresponding icon on the display
come on/go off.
Press the Extra Spülen button to
deactivate the function on a single
cycle execution without removing the
permanent option.
8.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing the
Ein/Aus button.
2. Press and hold the Extra Spülen and Plus
Dampf buttons for some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
4. To exit this mode, press any button.
If the procedure does not work (due to
timeout or wrong keys combination),
switch the appliance off and repeat
sequence from the beginning.
8.6 Factory Defaults
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
Ein/Aus button.
2. Press and hold the Flecken/Vorw. and
Zeit Sparen buttons for some seconds.
3. The display will show for about 5
seconds.
9. BEFORE FIRST USE
During installation or before first use you
may observe some water in the
appliance. This is a residual water left in
the appliance after a full functional test in
the factory to ensure the appliance is
delivered to customers in perfect working
order and is no cause for concern.
1. Make sure that all transit bolts have been
removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the detergent
compartment marked by .
This action activates the drain system.
4. Pour a small quantity of detergent into the
compartment marked by .
5. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.
This removes all possible dirt from the drum
and the tub.
ENGLISH 19
Bekijk gratis de handleiding van AEG LR7FD104V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LR7FD104V |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8843 MB |
