AEG LR7FD104B handleiding
Handleiding
Je bekijkt pagina 16 van 88
7.2 Programme dial
By rotating the programme dial it is possible
to select the desired programme.
7.3 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.4 Finish In
Set this option as last after programme
and other options selection, otherwise it
can be cancelled if you change some
setting.
This option allows choosing the time within
which a programme should terminate. The
programme end can be postponed by one 1
hour every button touch until 24 hours
maximum.
The display shows the normal programme
duration alternatively with the set programme
end time (expressed in hours 0h). The
minimum selectable time corresponds to
rounded up hour of the maximum duration of
a programme (e.g. if the cycle duration lasts
3:15 hours, the minimum selectable time will
be 4h).
After programme start, the door is locked and
the appliance starts the ProSense phase.
When load estimation ends, on the display
the icon of running phase blinks and the time
digit counts down in steps of one hour and in
steps of 1 minute during the last hour.
7.5 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a running
programme.
7.6 Plus Steam
This option adds a steam phase followed by a
short anti-crease phase at the end of the
washing programme.
The steam phase reduces fabric creasing and
facilitates the fabric ironing.
The Plus Steam option achieves good results
with a small load because steam better
penetrates the laundry if there is more space.
For this reason, the programme maximum
load combined with this option is 2 kg
(approximately 8 - 10 shirts).
When setting the Plus Steam option, the
maximum load drops to 2 kg in the display
and programme time is adjusted accordingly.
The indicator
blinks in the display during
steam phase.
This option can affect the programme
duration.
When the programme stops the display
shows a zero , the indicator is steady
on.
The anti-crease phase starts, the indicator
is blinking, and the Start/Pause led
remains lit. The drum performs smooth
movements for about 30 minutes to keep the
steam benefit.
To interrupt the anti-crease phase, you can:
• Press the On/Off button for a few
seconds to activate or the deactivate the
appliance.
• Turning the programme dial in another
position.
When the anti-crease movements stop and
the door unlocks, the appliance proposes
again the previous set programme.
A small laundry load helps to reach better
results.
7.7 Extra Rinse
With this option you can add a few rinses to
the selected washing programmes and
16 ENGLISH
Bekijk gratis de handleiding van AEG LR7FD104B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LR7FD104B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8239 MB |
