AEG LFR7394N2B handleiding
Handleiding
Je bekijkt pagina 23 van 144
Make sure that the flap does not cause a
blockage when you close the drawer.
10.5 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
E.g. the rinse phase is running: .
If you select the Vapor Plus the steam phase
indicators come on.
The steam phase is running: .
The anti-crease phase is running: .
10.6 Additional information about
daily use
The ProSense load detection
The appliance detects the load in the first 30
seconds. At the end of the load detection, the
indicator stop flashing.In case of drum
overload, the indicator
is flashing in
the display: It is possible to pause the
appliance and remove the exceeding
garments. If the laundry amount will not be
reduced, the washing programme starts
anyway. About 20 minutes after the
programme start, the programme duration
could be adjusted again depending on the
capacity of water absorption of the fabrics.
The ProSense Technology is not available in
programmes with short cycles.
Starting a programme
Touch the Inicio/Pausa button to start the
programme. The related indicator stops
flashing and stays on. The programme starts,
the door is locked. The display shows the
indicator .
Starting a programme with the Terminar
en/em
1. Touch this repeatedly until the display
shows the desired time within the programme
should end. The indicator comes on.
2. Touch the Inicio/Pausa
button. The
appliance starts the countdown to the end of
the programme and the programme will start
at the right moment for ending at the time set
through this option.
Interrupting a programme and changing
the options.
1. When the programme is running, you can
change only some options. Touch the Inicio/
Pausa button.
2. Change the options. The given information
in the display changes accordingly
3. Touch the Inicio/Pausa
again. The
washing programme continues.
Cancelling a running programme
1. Press the button On/Off button to cancel
the programme and to deactivate the
appliance
2. Now, you can set a new washing
programme. Press again to activate the
appliance.
Opening the door- adding garments
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the Inicio/Pausa button
2. Open the appliance door. If necessary, add
or remove the items.
3. Close the door and touch the Inicio/Pausa
again. The programme or the delay start
continues.
End of the programme
1. The appliance stops automatically. The
acoustic signals operate (if they are active).
2. The indicator of the Inicio/Pausa button
goes off. The door unlocks and the indicator
goes off .
3. Press the On/Off button to deactivate the
appliance. Keep the door and the detergent
ENGLISH 23
Bekijk gratis de handleiding van AEG LFR7394N2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | LFR7394N2B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 13958 MB |
