Handleiding
Je bekijkt pagina 4 van 16
4
It is necessary that all the operations regarding the installation, adjustment and
adaptation to the type of gas available are carried out by authorised personnel, in
conformity with the regulations in force. The specific instructions are described in the
booklet section intended for the installer.
Conditions of Use.
This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environmen
- Farm Houses
- By clients in hotels, motels and other residential type environments
- Bed and breakfast type environment
INSTRUCTIONS FOR THE USER
USING THE BURNERS
The symbols are laser printed on the side of the
to indicate the correspondence between the
knob and the burner.
Automatic start-up with valves
Turn the corresponding knob anticlockwise up
to the maximum position (large flame, f
ig.1) and
press the knob.
Once the flame is established, keep the knob
pressed for about 6 seconds.
Using the burners
To maximise gas efficiency and cooking
performance, it is important that the diameter of
the pot is suitable for the burner (see the follow
table), to avoid the flame going out (fig.2).
Use the high power burners to quickly
make liquids reach boiling temperature and the
lower power burners capacity to heat food or
maintain boiling. All of the operating positions
must be chosen between the maximum and the
minimum ones, never between the minimum
position and the closing point.
The gas supply can be interrupted by
turning the knob clockwise up to the closing
position.
BURNERS
Power (MJ/h) Ø of
cookware
(*)
NG LPG
Auxiliary 3,6 3,6 10 - 14 cm
Semi-rapid 6,3 6,3 16 - 18 cm
Rapid 10.8 10.8 20 - 22 cm
Double crown
21,6 21,6 24 - 26 cm
(*) For cookware with diameter 120mm or
below use mini-trivet supplied, refer fitment
instructions on page 15.
It is important to use cookware with the sizes
specified and ensure the cookware is always
correctly centred over the burner. Using
oversize cookware can potentially cause heat
damage to your benchtop and/or control knobs
which will not be covered under warranty.
Notice
– When the equipment is not working, always
check that the knobs are in the closing position
(see fig.1).
– If the flame should blow out accidentally, the
safety valve will automatically stop the gas
supply, after a few seconds. To restore operation,
set the knob to the lighting point (large flame, fig.
1) and press.
– While cooking with fat or oil, pay the utmost
attention as these substances can catch fire
when overheated.
– Do not place unstable or deformed pots on the
burner, so as to prevent them from overturning or
overflowing.
– Handles should be turned away from the front of
the bench to avoid accidents.
–
When the burner is started up, check that the
flame is regular and, before taking pots away,
always lower the flame or turn it off.
Bekijk gratis de handleiding van AEG HGC6366BB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | HGC6366BB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1636 MB |
