AEG FUF9490SMA handleiding
Handleiding
Je bekijkt pagina 17 van 28
10.3 Setting and starting a
programme
Starting a programme
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in programme selection mode and the
door is closed.
2. Press Program again and again until the
indicator of the desired programme is on.
The display shows the programme duration.
3. Set the applicable options.
4. Press Start to start the programme.
• The indicator of the running phase is
on.
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay start
1. Set a programme.
2. Press Delay repeatedly until the display
shows the desired delay time (from 1 to
24 hours).
3. Press Start to begin the countdown.
• The indicator
is on.
• The remaining time counts down in
hours. The final hour is displayed in
minutes.
When the countdown is completed, the
programme starts and the indicator of the
running phase is on. The indicator is off.
Opening the door while the appliance
operates
Opening the door while a programme is
running stops the appliance. It may affect the
energy consumption and the programme
duration. After closing the door, the appliance
continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it as this may cause
damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running programme
ends.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to
set the programme and options again.
1. Open the appliance door.
2. Press simultaneously Delay and Option
until the appliance is in programme
selection mode.
Cancelling the programme
1. Open the appliance door.
2. Press and hold simultaneously Delay and
Option until the appliance is in
programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a new
programme.
End of the programme
When the programme is complete, the Auto
Off function switches the appliance off
automatically.
All buttons are inactive except for the on/off
button.
Close the water tap.
Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
The function comes into operation:
• When the programme is complete.
• After 10 minutes if a programme was not
started.
ENGLISH 17
Bekijk gratis de handleiding van AEG FUF9490SMA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | FUF9490SMA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2609 MB |
