AEG FUF7590SMB handleiding
Handleiding
Je bekijkt pagina 14 van 28
How to activate SprayZone
Press Option until the indicator is on.
The display shows the updated programme
duration.
8. SETTINGS
8.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
Settings available in user mode:
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of the AirDry.
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
How to set the programme selection
mode
The appliance is in programme selection
mode when the programme indicator
flashes and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If not,
set the programme selection mode the
following way:
Press and hold simultaneously Delay and
Option until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter user mode, press and hold
simultaneously Delay and Option until the
indicators and , flash
and the display is blank.
8.2 The rinse aid level
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the hot rinse phase.
You can set the released quantity of rinse aid
between level 1 (minimum quantity) and level
6 (maximum quantity). Factory setting: 4.
When the rinse aid chamber is empty, the
rinse aid indicator is on, notifying to refill rinse
aid. If the drying results are satisfactory while
using multi-tablets only, you can deactivate
the dispenser and the indicator. However, for
best drying performance, always use rinse
aid and keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Program.
• The indicator
still flashes.
• The remaining indicators are off.
• The display shows the current setting:
e.g. = level 4.
2. Press Program repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
8.3 AirDry
AirDry improves the drying results with less
energy consumption. The appliance door
opens automatically during the drying phase
and remains ajar.
AirDry is automatically activated with all
programmes other than (if applicable).
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
14 ENGLISH
Bekijk gratis de handleiding van AEG FUF7590SMB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | FUF7590SMB |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2515 MB |
