AEG FBF7583SBB handleiding
Handleiding
Je bekijkt pagina 7 van 32
3.1 Safety caps
If the furniture panel is not installed, open the
appliance door carefully to avoid the risk of
injury.
After installation, make sure the plastic
covers are locked in position. Damage or
removal of the plastic covers on the sides of
the door may impact the functionality of the
appliance and may cause an injury. If the
plastic cover is damaged, contact the
Authorized Service Centre to replace it with
the new one.
max
5 mm
3.2 Adjusting the height of the
appliance
1. To adjust the front height, turn the 2 front
feet counterclockwise to raise the
appliance.
2. To adjust the rear height, turn the middle
screw counterclockwise to raise the
appliance.
3.3 Adjusting the level of the
appliance
Correct levelling of the appliance allows the
door to close and seal properly.
If the door does not close correctly, raise or
lower the adjustable feet to level the
appliance.
3.4 Water inlet hose
Connect the inlet hose to a water tap with an
external BSP thread spout of 3/4''.
For best washing performance, it is
recommended to connect the appliance to a
cold water supply.
Energy savings can be made by connecting
the appliance to a Solar water system and
using economy options, however the water
temperature must not exceed 60° C.
Inlet water supply
• Water pressure: 1000 kPa max - 50 kPa
min.
• Water flow rate 10 L / minute min.
• If water pressure is in excess of 1000 kPa,
a pressure reducing valve should be used.
Check for leaks.
• If water temperature is in excess of 60° C,
a tempering valve should be used. Check
for leaks.
ENGLISH 7
Bekijk gratis de handleiding van AEG FBF7583SBB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | FBF7583SBB |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2756 MB |
