AEG FBF7583SBB handleiding
Handleiding
Je bekijkt pagina 24 van 32
Problem and alarm code Possible cause and solution
The appliance switches off during
operation.
• Complete power outage. The wash cycle is temporarily interrupted and
resumes automatically once the power is restored.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
13.1 The dishwashing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results.
• Refer to "Daily use", "Hints and tips" and the basket loading leaf‐
let.
• Use more intensive washing programme.
• Activate the SprayZone option to wash items with heavy or stubborn
soil.
• Activate the ExtraPower option to improve the washing results of a
selected programme.
• Clean spray arm jets and filter. Refer to "Care and Cleaning".
• Make sure that the spray arms are correctly positioned.
Poor drying results.
• Tableware was left for too long inside the closed appliance. Activate
AirDry to set the automatic opening of the door and to improve the
drying performance.
• There is no rinse aid or the dosage of rinse aid is not sufficient. Fill
the rinse aid dispenser or set the level of rinse aid to a higher level.
• The quality of the rinse aid can be the cause.
• We recommend to use rinse aid always, even in combination with
multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase. Refer to "Pro‐
grammes overview".
There are whitish streaks or bluish lay‐
ers on glasses and dishes.
• The released quantity of rinse aid is too high. Adjust the rinse aid lev‐
el to a lower level.
• The quantity of detergent is too high.
There are stains and dry water drops
on glasses and dishes.
• The released quantity of rinse aid is not sufficient. Adjust the rinse
aid level to a higher level.
• The quality of the rinse aid can be the cause.
The interior of the appliance is wet.
• This is not a defect of the appliance. Humid air condensates on the
appliance walls.
24 ENGLISH
Bekijk gratis de handleiding van AEG FBF7583SBB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | FBF7583SBB |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2756 MB |
