Handleiding
Je bekijkt pagina 14 van 28
$
%
D
C
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
6.3 Replacing burner parts
1. Put carefully the burner crown on the
burner body. Let the crown fall freely onto
the body. Do not use force.
Make sure that the hole in the crown is
above the ignition candle.
Make sure that the location pegs are in
the slots in the burner body.
Make sure that you can move the crown a
small distance from side to side.
2. Put the burner cap centrally on top of the
crown.
Make sure that the cap is correctly
installed, with the enamel side up and you
can move the cap from side to side and
front to back.
3. Light the burner.
If the burner does not ignite, adjust the crown
and cap again.
6.4 Turning the burner off
To put the flame out, turn the knob to the off
position .
WARNING!
Always turn the flame down or switch it
off before you remove the pans from the
burner.
6.5 Lid Safety Device
Lid has safety device, which cuts off the gas
supply for the hob. Closing the lid activates
the safety device.
WARNING!
Always use the knob for the hob to switch
off a burner. Do not use the lid as a cut-
off device.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
• recommended: aluminium, copper
• not recommended:stainless steel, cast
iron, glass
WARNING!
Do not put the same pan on two burners.
14 ENGLISH
Bekijk gratis de handleiding van AEG CGX6130ACM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | CGX6130ACM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2231 MB |
