AEA RPQ503 handleiding
Handleiding
Je bekijkt pagina 10 van 16
10
SETTING THE GAIN (CONTINUED)
First Stage GAIN Control Adjustment
Connect the microphone and then, if needed, turn on phantom
power. Have the performer(s) play a louder section and click up the
GAIN (ref. #8) until the yellow LED usually lights and the red LED
rarely lights.
Second Stage OUTPUT Gain Trim
The OUTPUT Control (ref. #9) potentiometer adjusts gain from 0 dB
(unity gain) at the bottom to +20 dB gain when fully turned up. Like
the 12-step GAIN control, the 0 dB and +20 dB OUTPUT positions
are accurate and repeatable. Approximate OUTPUT gain at 9, 12,
and 3 o’clock are +3 dB, +7 dB, and +17 dB. The red LED lights 7
dB before clipping with a balanced load, so listen carefully to see
how it sounds when the red LED lights up more often.
We highly recommend familiarizing yourself with the maximum
input level of the piece of equipment that follows the RPQ503 in
your signal chain. Thus, the Red (+20dBu) Indicator may signify to
you that you're approaching the input limit to your converter, or
that you have surpassed the input limit of your converter. The same
goes for all outboard gear.
Bekijk gratis de handleiding van AEA RPQ503, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEA |
| Model | RPQ503 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2465 MB |
