Adventys P4IM 16000 handleiding
Handleiding
Je bekijkt pagina 20 van 31
20
You have to make a cut of 745 x 745 mm minimum.
(!) Warning: it is very important to follow this procedural step in order so as to ensure a perfect seal between
the worktop and the plancha.
The frame of the plancha, by construcon,
is raised by 3 to 5mm
You need to make a joint about 0.5cm
thick and ll inside the stainless steel
frame.
Use the SOUDAL silirub HT°-A silicone car-
tridge supplied with your product, the en-
re product must be applied.
1. Fill the space between the plancha
frame and the worktop.
2. Create a ght joint on the work sur-
face to prevent inltraon.
3. Leave the joint to dry for 24 hours
without heang the plancha.
4. Warm up the plancha gradually in
steps.
Bekijk gratis de handleiding van Adventys P4IM 16000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adventys |
| Model | P4IM 16000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12404 MB |
