Adventys INDUC-STONE handleiding
Handleiding
Je bekijkt pagina 30 van 40
30
-
Connect the control panel to the master device: the key-
board cable, 2m long, must connect the control panel to
the master Induc Stone.
The connecon between the master generator and the second is made with an intermediate "male/female"
cable with a length of 105cm.
Electrical connecon between the control panel and the master generetor
Electrical connecon between master generator and the next units (1,2,3,4 or 5)
The control panel which connects 1, 2, 3, 4 or 5 devices allows idencal sengs for all devices. It is not possible to
set the devices individually.
Connect the BLUE/ BROWN wire on NEUTRAL of the
electric socket.
Connect the GREY/BLACK wire on PHASE of the electric
socket.
Connect the GREEN and YELLOW wire on GROUND of
the electric socket.
Connect your device on the adapted electric socket of
a single-phase network 230 V, 50 Hz.
1. Connect the male plug of the cable to the female plug of the master generator
2. Connect the female plug of this same cable to the male plug of the second generator.
3. With another cable, connect the male plug to the female plug of the second generator and the female
plug to the male plug of the third generator.
4. Repeat the instrucons (3) depending on the number of devices you have.
Master generator
2nd generator
2nd generator
3rd generator
Bekijk gratis de handleiding van Adventys INDUC-STONE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adventys |
| Model | INDUC-STONE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10764 MB |
