Adventys GLP 6000 handleiding
Handleiding
Je bekijkt pagina 14 van 19
14
- Unscrew the 4 screws of the boom plate, located under the unit to access the connecon terminal
block area.
- Prepare a sector cable equipped with 5 conductor caps wiring.
- Place the cord into the cable clamp and ghten the cable clamp to secure the power cords.
- Connect the 5 wires of the power cord to the terminal block in accordance with the following diagram.
-
Terminal connecon cord
according with markings :
L1 (brown)
L2 (black)
L3 (grey)
N (blue)
Ground (green/yellow).
Input Power Cord
Power Cord
Connecng Plate
- Replace the boom plate by screwing the 4 screws.
- You can connect the power cord to a standard three phase plug 400 V +/- 10% of your electrical
installaon.
Bekijk gratis de handleiding van Adventys GLP 6000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adventys |
| Model | GLP 6000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5126 MB |
