Adventure Kings AKFR-FR90L_02 handleiding
Handleiding
Je bekijkt pagina 12 van 16
12 V2.3
13. POWER TIPS
14. COOLING TIPS
15. GENERAL TIPS
Pre-chill before your trip. Your fridge will use the most amount of power in the first 24 Hours of operation. The fridge needs
to cool down the walls, air and any product that isn’t already down to temperature. Ideally start loading your fridge 24 - 36
Hours before leaving home. If you are setting temperatures below -12ºC or a dual zone unit as a split fridge/freezer then
36 – 48 Hours before your trip the unit should be running.
Adventure Kings Fridge/Freezers have either a 240 Volt connection built in or via the included external 240 Volt adapter.
The fridge is no more or less efficient on 12 or 240 Volt power but to ensure your batteries are fully charged, ideally use the
2 days before your trip to cool your fridge and contents, this is an ideal time to make sure the battery your fridge will be
running from is fully charged.
Keep good air flow around the fridge, at least 50 mm on all 4 sides of the fridge, and an additional 100mm where the vents
of the fridge are located. All the heat from the compressor bay is removed through these vents, any restriction to this air flow
will reduce the cooling performance of the fridge and increase the power usage.
How full should your fridge be? It comes down to energy; pull energy out of something and it gets cooler, put energy in and
it gets warmer. Think of a kettle, put energy by turning it on, the water gets hotter, turn the kettle off and energy is released
from the water and the water gets cooler. Water vs Air, water takes around 4 times more energy to cool down compared
to air.
Therefore filling a fridge with liquid instead of leaving empty will take noticeably longer to cool down and use more power.
This is one big reason why pre-cooling your fridge is strongly recommended.
But every time you open your fridge, cool air will be pulled out and replaced with warm and moist air. So initially your empty
fridge will get cooler quicker, but anytime you open the lid it will take longer to get back down to temperature.
The optimum point ends up being around ½ to ¾ full of product. This fills the majority of the fridge and reduces air lost each
time the lid is opened but also leaves enough room for air flow around the product inside the fridge.
Air flow around products is also important for keeping all the product inside the unit at similar temperatures and making for
a more efficient fridge.
If you tightly pack product, it can take days for the product at the centre to correctly come down to temperature. This will
also have an effect on power usage.
• Avoid blocking the heat dissipation area when using the fridge.
• Avoid using the fridge in high temperature conditions or a small enclosed space.
• As with any fridge... air the fridge out after turning off to prevent mold and component
corrosion (thermistor).
• If temperature display is showing 40 Deg/LL/HH, thermistor may be cleaned with contact
cleaner or alcohol (accessible behind cover in fridge bin).
Bekijk gratis de handleiding van Adventure Kings AKFR-FR90L_02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adventure Kings |
| Model | AKFR-FR90L_02 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2389 MB |
