Advantech WISE-4471-S250 handleiding
Handleiding
Je bekijkt pagina 17 van 66
7 WISE-4471 Series User Manual
Chapter 2 Product Overview
2.1.4 Power
Power Input Voltage: DC 10-50V
Power Consumption: 1.7 W @ 24 V
DC
2.1.5 Software
Utility: WISE Studio
Driver: USB to UART Bridge (https://www.silabs.com/products/development-
tools/software/usb-to-uart-bridge-vcp-drivers)
Supported protocols: TCP/IP, UDP/IP, HTTP, HTTPS, TLS, DTLS, MQTT, CoAP,
MQTT-SN, LWM2M
Supports RESTful Web API.JSON format
2.2 I/O Specifications
2.2.1 Digital Inputs
Channels: 6
Logic level (dry contact)
– 0: Open
– 1: Close DI COM
Supports 32-bit counter input function (maximum signal frequency, 3 kHz)
Supports keep/discard counter value on power-off
Supports frequency input function (maximum signal frequency, 3 kHz)
Supports inverted digital input status
2.2.2 Digital Outputs
Channels: 2
Open collector to 30 V, 100 mA maximum for resistance load
Inductive loads require an external diode to eliminate back-EMF when the digital
output is OFF
Supports 5-kHz pulse output
Supports high-to-low and low-to-high delay output
2.2.3 RS-485 Port
Number of Ports: 1
Port Connector: 3.5mm spacing plug-in screw terminal block (shared with I/O
and power)
Baud Rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data Bits:7, 8
Stop Bits: 1, 2
Parity: None, Odd, Even
Signals: DATA+ and DATA-
Protection: 15 kV ESD
Supported Protocol: Modbus/RTU (Total 64 address by max. 30 instructions)
Bekijk gratis de handleiding van Advantech WISE-4471-S250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | WISE-4471-S250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7107 MB |
