Advantech WISE-4220 handleiding
Handleiding
Je bekijkt pagina 33 van 60
25 WISE-4220 Series User Manual
Chapter 4 System Configuration
4.2.5.6 Module Information
Here you can check the model name and the module description. The firmware ver-
sion will also been shown here. At the end of the configuration web page, you can
see the version. For the normal release module, the version on the configuration web
page will increase with the firmware version. These versions have to be updated
simultaneously.
To update the firmware version, go the “Firmware Version” section.
4.2.5.7 Network Configuration
AP Mode
When setting the module to AP mode, users can configure the SSID and also
decide how the WISE module works, including security. The “AP Mode IP Set-
tings” are fixed and do not allow users to make changes.
Infrastructure Mode
When using the module in “Infrastructure Mode”, users need to enter the SSID
of the Access Point (AP) that the WISE module is going to connect, and config-
ure the security type here. WISE-4220 series modules provide a “Second AP
Setting” section, an optional setting for the WISE module to connect to another
AP automatically. If you do not have a second AP, just leave the SSID blank.
After configuring the AP that the WISE module wants to access, the IP address
also needs to be defined in the Infrastructure-Network.
Bekijk gratis de handleiding van Advantech WISE-4220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | WISE-4220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5246 MB |
Caratteristiche Prodotto
| Wi-Fi-standaarden | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Connectiviteitstechnologie | Bedraad |
| Interface | WLAN |
| Wifi-band | Single-band (2.4 GHz) |
| Wifi-standaard | Wi-Fi 4 (802.11n) |
