Advantech WISE-4220 handleiding
Handleiding
Je bekijkt pagina 26 van 60
WISE-4220 Series User Manual 18
3.3 Wiring & Connections
This section introduces basic information on wiring the power supply and I/O units.
3.3.1 Power Supply Wiring
The system of WISE-4220 is designed for a standard industrial unregulated 24 V
DC
power supply. For further application, it can also accept +10 to +50 V
DC
of power
input, 200mV peak to peak of power ripple, and the immediate ripple voltage should
be maintained between +10 and +50 V
DC
. Screw terminals +Vs and -Vs are for
power supply wiring.
Figure 3.10 Power Wiring
3.3.2 I/O Units
The system uses a plug-in screw terminal block for the interface between I/O mod-
ules and field devices. The following information must be considered when connect-
ing electrical devices to I/O modules.
The terminal block accepts wires from 0.5 mm to 2.5 mm.
Always use a continuous length of wire. Do not combine wires.
Use the shortest possible wire length.
Use wire trays for routing where possible.
Avoid running wires near high-energy wiring.
Avoid running input wiring in close proximity to output wiring.
Avoid creating sharp bends in the wires.
Bekijk gratis de handleiding van Advantech WISE-4220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | WISE-4220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5246 MB |
Caratteristiche Prodotto
| Wi-Fi-standaarden | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Connectiviteitstechnologie | Bedraad |
| Interface | WLAN |
| Wifi-band | Single-band (2.4 GHz) |
| Wifi-standaard | Wi-Fi 4 (802.11n) |
