Advantech VEGA-3311 handleiding
Handleiding
Je bekijkt pagina 11 van 23
Page 11 of 23
Source IP: Disable
Destination IP: Disable
Source port: Disable
Destination port: Enable
Command “vega3311_voip2110_config get_eth_parm 0” can get network parameter in FPGA device id
0.
eager@test-desktop:~$ vega3311_voip2110_config get_eth_parm 0
Ethernet Interface ID: 0
status: Enable
IP address: 192.168.1.23
Net Mask address: 255.255.255.0
Gateway address: 192.168.1.254
Mac address: aa:da:eb:27:0a:48
Ethernet Interface ID: 1
status: Enable
IP address: 192.168.6.207
Net Mask address: 255.255.255.0
Gateway address: 192.168.6.254
Mac address: f2:2c:8a:11:b9:dc
Command “vega3311_voip2110_config set_eth_parm 0 0 1 192.168.1.23 255.255.255.0
192.168.1.254 0:0:0:0:0:0” can set network parameter of 10G port 0 in FPGA device id 0 and enable the
10G port 0.
If the mac address set to 0:0:0:0:0:0, the mac address will use Mac address stored in SPI flash.
eager@test-desktop:~$ vega3311_voip2110_config set_eth_parm 0 0 1 192.168.1.23 255.255.255.0
192.168.1.254 0:0:0:0:0:0
DRV INF: SF: Got idcode 0xc2 0x20 0x1b
Command “vega3311_voip2110_config get_link_status 0 0” get network link status of 10G port 0 in
FPGA device id 0.
eager@test-desktop:~$ vega3311_voip2110_config get_link_status 0 0
Link status by Ethernet Interface-0
RX part:
packets: 292967
errors: 0
dropped: 1
Bekijk gratis de handleiding van Advantech VEGA-3311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | VEGA-3311 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2577 MB |
