Advantech UTC-510D handleiding
Handleiding
Je bekijkt pagina 42 van 77
UTC-510/515/520/532/542 User Manual 32
3.1 Introduction
Advantech’s UTC series systems are PC-based computers housed in an aluminum
enclosure. To perform system maintenance or hardware upgrades, such as installing
an HDD, DRAM, or CompactFlash (A/B models only), simply remove the unit’s rear
cover.
3.2 Installing a 2.5” SATA HDD
UTC systems feature a 2.5” SATA HDD bay reserved for customizable storage. To
install a 2.5” SATA HDD, follow the steps below.
1. Loosen the affixing screws and remove the rear cover.
2. Insert the SATA HDD into the metal bracket and fasten in place with screws.
3. Use a power cable to connect the SATA HDD to the power supply unit.
4. Use a SATA data cable to connect the SATA HDD to the motherboard.
5. Replace the rear cover and tighten the screws.
Warning! Do not remove the rear cover until you have verified that power is not
flowing within the device. The system power should be switched off and
the power cord unplugged before opening the device enclosure.
Bekijk gratis de handleiding van Advantech UTC-510D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | UTC-510D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7906 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart, zilver |
| Breedte | 265 mm |
| Diepte | 40 mm |
| Hoogte | 182 mm |
| Beeldschermdiagonaal | 10.1 " |
