Advantech UTC-510D handleiding
Handleiding
Je bekijkt pagina 39 van 77
29 UTC-510/515/520/532/542 User Manual
Chapter 2 System Setup
2.3 Setup Procedures
2.3.1 System Power On
1. For the UTC-510 model, connect the system to a power adaptor with 12V/3A
input voltage. For the UTC-515 and UTC-520A/B/C/D/E models, a 12V/5A
power adaptor. For the UTC-520C/E models, a 12V/7A power adaptor. For the
UTC-532/542 models, connect the system to an AC power cable.
2. Hold power cords by the plugs ends only. Refer to Section 2.2 for the location of
the DC/AC power input and power switch.
3. Press the power switch to activate the system. The PWR LED should emit a
green light.
2.3.2 BIOS Setup
For most UTC series, the system setup and configuration will be completed by the
dealer or system integrator prior to delivery. However, users may still need to access
the BIOS setup program to adjust the system configuration, such as the date/ time or
hard drive type. The setup program is stored in read-only memory (ROM) and can be
accessed following system reset or by pressing the “Del” key after powering on the
computer. The settings selected in the setup program are recorded in CMOS RAM
memory, which is backed up by a battery to ensure the settings are retained after the
system is powered off. When booting up, the system compares the settings stored in
CMOS RAM with the POST self test results. If a discrepancy is found, an error mes-
sage is displayed on screen and users are prompted to run the setup program.
2.3.3 System Software Installation
Recent releases of operating systems from major vendors include setup programs
that load automatically and guide users through hard disk preparation and operating
system installation. Some distributors and system integrators may have already
installed software prior to shipping the product.
2.3.4 Driver Installation
After installing the system software, users can set up the Ethernet, XGA, audio, and
touchscreen functions.
Note! Before software or driver installation, the system must be equipped with
additional storage that users must purchase separately.
Note! The relevant drivers and utilities are subject to change without notice.
Download the latest drivers for UTC series products from the Advantech
website at http://support.advantech.com or contact our application
engineers for further assistance.
Bekijk gratis de handleiding van Advantech UTC-510D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | UTC-510D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7906 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart, zilver |
| Breedte | 265 mm |
| Diepte | 40 mm |
| Hoogte | 182 mm |
| Beeldschermdiagonaal | 10.1 " |
