Advantech USM-S67-G00P0 handleiding
Handleiding
Je bekijkt pagina 29 van 81
www.advantech.com
29
29
directly ties an end-device to a specific network bypassing
the join request - join accept procedure.
Class Type
Device type is Class A by default. Users can check the box
of Class B or Class C to add the class type.
Note: Beacon period should be set to nonzero value in
Packet Forwarder->Advanced if you use Class B.
----
Table 3-2-2-6 Device Profiles Setting Parameters
Figure 3-2-2-9
Device Profile Advanced Settings
Item
Description
Default
MAC Version
Choose the version of the LoRaWAN
®
supported
by the end-device.
1.0.2
Regional
Parameter
Revision
Revision of the Regional Parameters document
supported by the end-device.
B
RX1 Data rate
Offset
The offset which used for calculating the RX1
data-rate, based on the uplink data-rate.
Based on what
is specified in
the LoRaWAN
®
regional
parameters
document
RX2 Data rate
Enter the RX2 data rate which used for the RX2
receive-window.
RX2 Channel
Frequency
RX2 channel frequency which used for the RX2
receive-window.
Frequency List
List of factory-preset frequencies. The range is
based on what is specified in the LoRaWAN
®
regional parameters document.
Null
Device
Channel
Change this device frequency channel by typing
the channel indexs. When configured, it takes
precedence over the global channel. This setting
only works for CN470/US915/AU915 gateway.
Null
Bekijk gratis de handleiding van Advantech USM-S67-G00P0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USM-S67-G00P0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9739 MB |
