Advantech USM-S67-G00P0 handleiding
Handleiding
Je bekijkt pagina 23 van 81
www.advantech.com
23
23
Log level
Choose the log level.
Info
Channel Plan Setting
Channel Plan
Choose LoRaWAN
®
channel plan used for the
upstream and downlink frequencies and data
rates. Available channel plans depend on the
gateway’s model.
Depend on the
gateway’s frequency
Channel
Enabled frequencies are controlled using channel
mask.
Leave it blank means using all the default
standard usable channels specified in the
LoRaWAN
®
regional parameters document.
It allows to enter the index of the channels.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and
Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
Depend on the
gateway’s frequency
Table 3-2-2-1 General Parameters
Note: For some regional variants, if allowed by your LoRaWAN
®
region, you can use
Additional Plan to configure additional channels undefined by the LoRaWAN
®
Regional
Parameters, like EU868 and KR920, as the following picture shows:
Figure 3-2-2-2
Additional Channels
Item
Description
Default
Frequency/MHz
Enter the frequency of the additional plan.
Null.
Max Data rate
Enter the max data rate for the end-device.
The range is based on what is specified in
the LoRaWAN
®
regional parameters
document.
DR0 (SF12,125 kHz)
Min Data rate
Enter the min data rate for the end-device.
The range is based on what is specified in
the LoRaWAN
®
regional parameters
document.
DR3 (SF9,125 kHz)
Table 3-2-2-2 Additional Plan Parameters
3.2.2.2 Application
Bekijk gratis de handleiding van Advantech USM-S67-G00P0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USM-S67-G00P0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9739 MB |
