Advantech USM-S67-G00P0 handleiding
Handleiding
Je bekijkt pagina 17 van 81
www.advantech.com
17
17
3.2.1.3 Noise Analyzer
Noise analyzer is used for scanning the noise of every frequency channel and giving a
diagram for users to analyze the environment interference condition and select best
deployment. RSSI indicates the sensitivity for every channel. Lower the RSSI value, better the
signal. It’s not suggested to enable this feature when using package forwarder since it will
affect the downlink transmission.
Figure 3-2-1-6
Noise Analyzer
Item
Description
Default
Enable
Click to enable noise analyzer feature.
Disabled
Sweep Freq
Select the frequency sweeping range.
General Freq:
frequencies based on the LoRaWAN
®
regional parameters document
Custom:
custom the frequency range
General Feq
Sweep Time
Enable the noise analyzer continuously or within a
period of time.
If Custom is selected, the noise analyzer will stop
automatically after the pre-configured time.
Note: It’s suggested to custom the time since noise
analyzer feature will affect the normal data
transmission.
Custom/24h
Table 3-2-1-6 Noise Analyzer Setting Parameters
3.2.1.4 Advanced
This section is about settings in details of beacon transmitting and validating.
Bekijk gratis de handleiding van Advantech USM-S67-G00P0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USM-S67-G00P0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9739 MB |
