Advantech USB-5817 handleiding
Handleiding
Je bekijkt pagina 2 van 3
2 USB-5817 Startup Manual
USB-5817 modules have a built-in DIP switch that is used
to dene the board ID for each module. When multiple
modules are installed in the same system, the board
ID switch can be used to identify each module’s device
number. Every module in the system should be assigned
different device numbers. The default board ID value is 0.
When conguring the board ID to any other value, refer to
the settings in the following table:
Switches
SW2~SW8 are used to congure the analog input as volt-
age measurement (±10 V) or current measurement (0 ~ 20
mA). The default setting is voltage measurement.
• InputImpedance
- Differential:800 kΩ
- CommonMode:200 kΩ
• InputFIFOSize:4,096 samples shared among all
enabled channels
1. Install the SDK and drivers downloaded from the
Advantech website.
2. Touch the metal case of the computer to discharge any
static electricity that may be in your body.
3. Insert the USB module into the designated USB port.
Use caution when inserting the module to avoid damag-
ing the components from excessive force.
FCCClassA
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequen-
cy energy and, if not installed and operated in accordance
with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in
a residential area is likely to cause interference. In such
cases, users are required to correct the interference at their
own expense.
CE
This product has passed the CE test for environmental
specications when shielded cables are used for external
wiring. We recommend the use of shielded cables. Such
cables are available from Advantech. Please contact your
local supplier for ordering information.
USB-5817 modules feature two power input terminals with
an input power range of 10 ~ 30 V
DC
and power redun-
dancy support. For modules connected to two power input
sources, if one source is inactive or interrupted, the other
power source can immediately assume supply operations.
Accordingly, USB-5817 modules can operate with a single
power source. (The modules can also be powered via USB
if there is no device connected to the downstream port.)
BoardIDSwitch
DeclarationofConformity
Specications(Cont.)
Power
InstallationInstructions
Bekijk gratis de handleiding van Advantech USB-5817, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USB-5817 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 423 MB |
