Advantech USB-4716 handleiding
Handleiding
Je bekijkt pagina 14 van 30
USB-4716 User Manual 6
2.3 Hardware Installation
After the driver installation is completed, you can now go on to install the USB-4716
module in any USB port that supports USB 2.0/3.0 standard, on your computer.
Please follow the steps below to install the module on your system.
Step 1: Touch the metal part on the surface of your computer to neutralize the static
electricity that might be in your body.
Step 2: Plug your USB module into the selected USB port. Use of excessive force
must be avoided; otherwise the module might get damaged.
Note! Make sure you have installed the software driver before you install the
module (please refer to Section 2.2 Driver Installation)
Note! In case you installed the module without installing the DLL driver, OS
will recognize your module as an “unknown device”. After reboot,it will
prompt you to provide necessary driver. You should ignore the prompt-
ing messages and set up the driver according to the steps described in
Sec.2.2.
Bekijk gratis de handleiding van Advantech USB-4716, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USB-4716 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1804 MB |
