Advantech USB-4711A handleiding
Handleiding
Je bekijkt pagina 14 van 26
USB-4711A User Manual 6
2.3 Hardware Installation
After the driver installation has completed, you can now go on to install the USB-
4711A module in any USB port that supports the USB 3.0 standard. Please follow the
steps below to install the module on your system.
Step 1.Touch the metal part on the surface of your computer to neutralize the static
electricity that might be on your body.
Step 2.Plug your USB module into the selected USB port. Use of excessive force
must be avoided; otherwise the module might get damaged.
After your module has installed, you can configure it using the Advantech Navigator.
Note! Make sure you have installed the software driver before you install the
module (please refer to Section 2.2 Driver Installation)
Note! In case you installed the module without installing the driver, the operat-
ing system will recognize your module as an “unknown device”. After
reboot,it will prompt you to provide the necessary driver. You should
ignore the prompting messages and set up the driver according to the
steps described in Sec.2.2.
Bekijk gratis de handleiding van Advantech USB-4711A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | USB-4711A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1754 MB |
