Advantech UNO-3272G handleiding
Handleiding
Je bekijkt pagina 21 van 64
11 UNO-3272G User Manual
Chapter 2 H/W Installation
2.2 Jumpers
Configure the UNO-3272G to match the needs of your application by setting jumpers.
To close a jumper, you connect the pins with the clip. To open a jumper, you remove
the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you
would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
2.2.1 Jumper list
Table 2.3: COM Connector
Location Function
CN2 COM1/COM2
CN3 COM3COM4
CN4 MIC IN
CN6 LINE Out
Table 2.4: Jumper List (motherboard)
Location Function
CN1 Clear CMOS
CN14 System AT/ATX mode option
Bekijk gratis de handleiding van Advantech UNO-3272G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | UNO-3272G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8001 MB |
