Advantech UNO-2372G handleiding
Handleiding
Je bekijkt pagina 7 van 62
Safety Instructions
vii
UNO-2372G-J1 User Manual
1.
Read these safety instructions carefully.
2.
Retain this user manual for future reference.
3.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth for cleaning. Do not use liquid or spray detergents.
4.
For pluggable equipment, the power outlet socket should be located near the
equipment and easily accessible.
5.
Protect the equipment from humidity.
6.
Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7.
The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8.
Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
9.
Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12.
Never pour liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14.
If one of the following occurs, have the equipment checked by service
personnel:
– The power cord or plug is damaged.
– Liquid has penetrated the equipment.
– The equipment has been exposed to moisture.
– The equipment is malfunctioning or does not operate according to the user
manual.
– The equipment has been dropped and damaged.
– The equipment shows obvious signs of breakage.
15.
Do not leave this equipment in an environment with a storage temperature of
below -40 °C (-40 °F) or above 85 °C (185 °F).
16.
Batteries that are incorrectly replaced are at risk of exploding. Replace only with
the same or equivalent type recommend by the manufacturer. Discard used bat-
teries according to the manufacturer’s instructions.
17.
Danger d'explosion si la batterie est mal remplace. Remplacer uniquement par
le meme type ou equivalent recommandé par le fabricant. Jeter les piles
usagées selon les instructions du fabricant.
18.
In accordance with IEC 704-1:1982 specifications, the sound pressure level at
the operator's position does not exceed 70 dB (A).
19.
This product is intended to be supplied by an UL certified power supply or dc
source suitable for use at minimum Tma 60 degree C whose output meets
SELV or ES1 and is rated 10-36Vdc, 4A or 5.1A min. to match the unit rating,
if need further assistance, please contact Advantech for further information.
DISCLAIMER: These instructions are provided according to the IEC 704-1. Advant-
ech disclaims all responsibility for the accuracy of any statements contained herein.
Bekijk gratis de handleiding van Advantech UNO-2372G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | UNO-2372G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10994 MB |
