Advantech TPC-317 EHL handleiding
Handleiding
Je bekijkt pagina 24 van 48
TPC-300 Elkhart Lake Series User Manual 12
2.1 Transport and Unpacking
2.1.1 Transport
After accepting delivery of the product, check the packaging for visible signs of dam-
age during transit. Additionally, check the contents of the shipment for completeness
by comparing it with the order details. If you notice any shipping damage or inconsis-
tencies between the contents and your order, inform the responsible delivery service
immediately.
During transportation, the product should be protected from excessive mechanical
stress. If the product is transported or stored without packaging, shocks, vibrations,
pressure, and moisture may impact the unprotected unit. Damaged packaging indi-
cates that ambient conditions have already had a massive impact on the device.
Therefore, we recommend using the original packaging during transportation and
storage.
If the device is transported in cold weather or exposed to extreme temperature varia-
tions, ensure that moisture (condensation) does not accumulate on or inside the
device. Moisture can cause electrical circuits to short and damage the device. To
avoid exposure to moisture, store the device in a dry place. Additionally, ensure the
device is at room temperature before switching it on. If you notice condensation has
occurred, wait for approximately 12 hours to allow the device to dry completely
before switching it on.
2.1.2 Unpacking
1. Unpack the TPC device.
2. Connect the power connector to the 24 V
DC
power lines of a power adapter or
in-house power source.
Figure 2.1 Power Connector and Power Lines
Bekijk gratis de handleiding van Advantech TPC-317 EHL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | TPC-317 EHL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5951 MB |
