Advantech TPC-110W handleiding
Handleiding
Je bekijkt pagina 21 van 42
5 TPC-100W Series User Manual
Chapter 1 General Information
1.3 Mounting
VESA Mount
The TPC-100 rear cover features four VESA mounting (100 x 100 mm) holes. The
VESA mounting kit needs to be installed with 4 pieces using M4x10L screws. Please
use a suitable mounting apparatus to avoid risk of injury.
Panel Mount
There is an adhesive waterproof gasket on the front bezel. Make sure the waterproof
gasket is in position before installing a TPC-100W panel computer into the panel
opening.
1. Install the TPC into the panel opening.
2. Find the six clamps and six long screws in the accessory pack. Hook the clamps
to the holes around the four sides of the bezel. Insert the screws into every
clamp and fasten them. These screws will push the mounting panel and fix the
unit in place.
3. The suggested mounting panel thickness is less than 6 mm (0.236").
Table 1.2: Panel Mounting
Insert the screws into each clamp and tighten
them to fasten the clamp in place.
Hook the clamp into the holes and fasten the
screws (Torque: 5 kgf-cm)
These screws will push the mounting panel and
secure the unit.
Table 1.3: Panel Mounting
Size W7 W10 W15 W21
Screw (M4 x 25mm) &
Clamper Quantity
4 8 10 12
Bekijk gratis de handleiding van Advantech TPC-110W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | TPC-110W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6140 MB |
