Advantech SQF-SLM 630 handleiding
Handleiding
Je bekijkt pagina 20 van 24
SQFlash
SATA Slim 630
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 1.0 Page 20 of 24 Apr. 1, 2016
This command writes from “1” to “256” sectors as specified in the Sector Count register using the DMA
data transfer protocol. A sector count of “0” requests “256” sectors transfer. The transfer begins at the
sector specified in the Sector Number register.
46. WRITR DMA EXT (code: 35h);
This command writes from “1” to “65536” sectors as specified in the Sector Count register using the DMA
data transfer protocol. A sector count of “0” requests “65536” sectors transfer. The transfer begins at the
sector specified in the Sector Number register.
47. WRITE MULTIPLE (code: C5h);
This command is similar to the WRITE SECTORS command. Interrupts are not presented on each sector,
but on the transfer of a block which contains the number of sectors defined by Set Multiple command.
48. WRITE MULTIPLE EXT (code: 39h);
This command is similar to the WRITE SECTORS command. Interrupts are not presented on each sector,
but on the transfer of a block which contains the number of sectors defined by Set Multiple command.
49. WRITE SECTOR(S) (code: 30h);
This command writes from “1” to “256” sectors as specified in the Sector Count register. A sector count of
“0” requests “256” sectors transfer. The transfer begins at the sector specified in the Sector Number
register.
50. WRITE SECTOR(S) EXT (code: 34h);
This command writes from “1” to “65536” sectors as specified in the Sector Count register. A sector count
of “0” requests “65536” sectors transfer. The transfer begins at the sector specified in the Sector Number
register.
51. WRITE SECTOR(S) W/O ERASE (code: 38h);
This command writes from “1” to “256” sectors as specified in the Sector Count register. A sector count of
“0” requests “256” sectors transfer. The transfer begins at the sector specified in the Sector Number
register.
52. WRITE VERIFY (code: 3Ch);
This command is similar to the WRITE SECTOR(S) command, except that each sector is verified before
the command is completed.
Bekijk gratis de handleiding van Advantech SQF-SLM 630, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SQF-SLM 630 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3884 MB |
Caratteristiche Prodotto
| Breedte | 39 mm |
| Diepte | 4.5 mm |
| Hoogte | 54 mm |
| Interface | SATA III |
| Veiligheidsfunties | Shock resistant, Vibration proof |
