Advantech SQF-SDM 630 handleiding
Handleiding
Je bekijkt pagina 5 van 25
SQFlash
SATA DOM 630 Horizontal
Specifications subject to change without notice, contact your sales representatives for the most update information.
REV 1.0 Page 5 of 25 Apr. 1, 2016
2. Features
Standard SATA interface
– Support SATA 1.5 Gbps, 3.0 Gbps, and 6.0 Gbps interface
– SATA Revision 3.0 compliant
– Power management supported
Operating Voltage：5V
Support 72 bit ECC correct per 1K Byte data
TRIM、AHCI supported
Hardware write protect supported
Temperature Ranges
– Commercial Temperature
● 0℃ to 70℃ for operating
● -40℃ to 85℃ for storage
– Industrial Temperature
● -40℃ to 85℃ for operating
● -40℃ to 85℃ for storage
Mechanical Specification
– Shock：1,500G / 0.5ms
– Vibration：20G / 80~2,000Hz
Humidty
– Humidity：5% ~ 95% under 55℃
Endurance : > 2,000,000 program/erase cycles
– This is a test result of the whole SQFlash drive. The test is to keep writing a fixed logical block address (LBA)
and see if any bad blocks occur after 2M cycles. With wear-levelling mechanism, although the disk was kept
writing the same LBA but the physical block changes per block writing. So this test also proves that
wear-leveling is really working, or the block would be wearout after its designated life cycles.
Data Retention
– 10 years
Acquired RoHS、WHQL、CE、FCC Certificate
Acoustic：0 dB
Dimension：44.7 mm x 22.2 mm x 1.0 mm
Bekijk gratis de handleiding van Advantech SQF-SDM 630, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SQF-SDM 630 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4040 MB |
Caratteristiche Prodotto
| Breedte | 11.2 mm |
| Diepte | 4.2 mm |
| Hoogte | 44.7 mm |
| Interface | SATA III |
| Veiligheidsfunties | Shock resistant, Vibration proof |
