Advantech SOM-5885 handleiding
Handleiding
Je bekijkt pagina 19 van 106
9 SOM-5885 User Manual
Chapter 1 General Information
1.3.9.11 BIOS
The BIOS chip is placed on the module by default. Users can place the BIOS chip on
the carrier board with the appropriate design and jumper setting in BIOS_DIS#[1:0].
Note: If system COMS is cleared, Advantech strongly suggests going to the BIOS
setup menu and loading the default settings on the first boot-up.
The standard module has no jumper at SW1, so BIOS settings are kept without an
RTC coin battery. If you need to restore the BIOS to default settings, follow the steps
below:
1. Remove the coin battery.
2. Push the button on SW1.
3. Turn on the power supply.
4. The system will boot up a few times.
5. The BIOS will load the default settings.
1.3.10 Power Management
1.3.10.1 Power Supply
Both ATX and AT power modes are supported. VSB is for suspended power and is
optional if not required by standby (suspend-to-RAM) support. The RTC battery is
optional if datekeeping/timekeeping is not required.
Table 1.8: BIOS
BIOS_DIS#0 BIOS_DIS#1 Boot-Up Destination/Function
Open Open Boot from the Module’s SPI BIOS
Open GND SPI_CS0# to Carrier Board, SPI_CS1# to Module
GND GND SPI_CS0# to Module, SPI_CS1# to Carrier Board
Bekijk gratis de handleiding van Advantech SOM-5885, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SOM-5885 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10402 MB |
