Advantech SKY-MXM-RTX3000 handleiding
Handleiding
Je bekijkt pagina 14 van 20
SKY-MXM-RTX3000 User Manual 8
2.1 Power Sequencing
There is no power sequencing requirement for the input voltages to the MXM mod-
ule. However, the PWR_EN signal may be asserted only after all power rails are
within a specified tolerance. The state of PWR_GOOD is undefined until all rails are
fully ramped. Refer to Figure 2.1 for details.
Figure 2.1 Power Sequencing
2.2 Input Voltage Requirements
Input voltage to the GPU must strictly follow the ranges listed in the below table (with
reference to GND).
Operating outside the required voltage range will cause permanent damage to the
GPU.
Table 2.1: Signals Exempted
Group Signals
Power and Thermal SMB_CLK, SMB_DAT, TH_OVER#, TH_ALERT#, PWR_GOOD
System Management WAKE#, PEX_CLK_REQ#
Display DP_x_HPD, LVDS_x_HPD
Note! No voltage shall be applied to any MXM module signal pin (except
power pins and open drain signals specified in Table 2.1) until PWR_-
GOOD is asserted.
Power Rail Min. Typ. Max.
PWR_SRC 6.5V 7-20V 22V
5V 4.7V 5V 5.3V
3V3 3.1V 3.3V 3.5V
Bekijk gratis de handleiding van Advantech SKY-MXM-RTX3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SKY-MXM-RTX3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1775 MB |
