Advantech RSB-4680CQ-XNA1E handleiding
Handleiding
Je bekijkt pagina 14 van 66
RSB-4680 User Manual 6
2.1 Jumpers
2.1.1 Jumper Description
Cards can configured by setting jumpers. A jumper is a metal bridge used to close an
electric circuit. It consists of two metal pins and a small metal clip (often protected by
a plastic cover) that slides over the pins to connect them. To close a jumper, connect
the pins with the clip. To open a jumper, remove the clip. Sometimes a jumper will
have three pins, labeled 1,2, and 3. In this case you would connect either pins 1 and
2 or 2 and 3.
The jumper settings are schematically depicted in this manual as follows
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes.
Generally, you simply need a standard cable to make most connections.
2.1.2 Jumper List
Warning! To avoid damaging the computer, always turn off the power supply
before setting jumpers.
12 12
Table 2.1: Jumper List
LVDS_BLP LVDS Backlight Power Jumper
LVDS_VDD1 LVDS Power Jumper1
LVDS_VDD2 LVDS Power Jumper2
SW3 AT & ATX Mode Switch
CN6 COM6 & COM7 5V/12V Power Select
CN18 RS485 Impedance Select & Console Select
CN19 MASKROM Mode Select
JSETCOM4 COM4 RS232/RS485 Mode Select
Bekijk gratis de handleiding van Advantech RSB-4680CQ-XNA1E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | RSB-4680CQ-XNA1E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8687 MB |
