Advantech RSB-4220 handleiding
Handleiding
Je bekijkt pagina 62 van 72
RSB-4220 User Manual 56
4.1 System Recovery
This section describes the procedures for restoring an eMMC image. If the onboard
flash image is accidentally destroyed, follow the instructions provided below to per-
form a system recovery.
1. Copy the “RSB-4220LIVxxxx_yyyy-mm-dd.tar.gz” package to your /root/.
2. Open “terminal” on Ubuntu 14.04 LTS.
3. $sudo su (Change to “root” authority.)
4. Input the user password.
5. #cd root/
6. #tar xzvf RSB-4220LIVxxxx_yyyy-mm-dd.tar.gz (unzip files)
7. Insert an SD card into the development computer
8. Identify the SD card location, for example, “/dev/sdb”.
9. #cd ./RSB-4220LIVxxxx_yyyy-mm-dd/scripts
10. #./mksd-linux.sh /dev/sdb
11. Type “y” (Copy files and wait until the process is marked as [Done].)
12. Connect the console cable to the debug port (CN1). Open the serial console
program on Ubuntu 14.04 LTS, and set the baud rate to 115200. For detailed
console settings, refer to Section 3.6.
13. On the RSB-4220 platform, type #root (login)
14. On the RSB-4220 platform, type #cd /mk_inand
15. On the RSB-4220 platform, type #./mkinand-linux.sh /dev/mmcblk1
16. On the RSB-4220 platform, type “y “
(Copy files and wait until the process is marked as [Done].)
17. Power off the platform and remove the SD card.
Bekijk gratis de handleiding van Advantech RSB-4220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | RSB-4220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6307 MB |
