Advantech ROM-3310 handleiding
Handleiding
Je bekijkt pagina 25 van 62
17 ROM-3310 User Manual
Chapter 3 Software Functionality
3.9 CAN Test
1. Check CAN network device.
2. Test CAN device (Connect CAN0 & CAN1).
If can0.log and can1.log store receive data the same, it CAN test PASS
3.10 I2S Test
MIC IN command as following: (44100 is the sample rate)
Audio out command as following:
# ls /sys/class/net/
can0 can1 eth0 lo
#canconfig can0 stop >/dev/null;canconfig can0 bitrate 1000000
>/dev/null;canconfig can0 start >/dev/null
#canconfig can1 stop >/dev/null;canconfig can1 bitrate 1000000
>/dev/null;canconfig can1 start >/dev/null
#candump can0 >can0.log &
#candump can1 >can1.log &
# cansend can0 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88
# cansend can1 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88
#cat can0.log
interface = can0, family = 29, type = 3, proto = 1
<0x001> [8] 11 22 33 44 55 66 77 88
<0x001> [8] 11 22 33 44 55 66 77 88
#cat can1.log
interface = can1, family = 29, type = 3, proto = 1
<0x001> [8] 11 22 33 44 55 66 77 88
<0x001> [8] 11 22 33 44 55 66 77 88
#amixer sset 'Right PGA Mixer Mic3R' on
#arecord -t wav -c 1 -r 44100 -d 5 2.wav
#aplay /unit_tests/Advantech.wav
Bekijk gratis de handleiding van Advantech ROM-3310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ROM-3310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7640 MB |
