Advantech PPC-312SW handleiding
Handleiding
Je bekijkt pagina 27 van 66
PPC-312S(W) RPL User Manual
17
Chapter
2
System
Setup
1. Remove the rear cover. See Section 2.2.1.
2. Remove the two knockout holes from the top bracket of the rear cover indi-
cated below.
Figure 2.16 Removing Knockout Holes
3. Install the SMA connectors into the knockout holes on the top bracket.
4. Insert the M.2 Wi-Fi module into the M.2 E-key slot (M2E1) on the mother-
board and secure it using the provided screw.
5. Carefully connect the internal Wi-Fi antenna to the appropriate connectors
on the Wi-Fi module. Route the antenna cables to prevent interference with
other components.
Figure 2.17 Wi-Fi Kit Installation
6. Attach the rear cover to the chassis using the previously removed screws.
7. Install the external Wi-Fi antennas as shown below.
0.
Figure 2.18 External Antenna Installation
Bekijk gratis de handleiding van Advantech PPC-312SW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | PPC-312SW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8533 MB |
