Advantech POC-824 handleiding
Handleiding
Je bekijkt pagina 4 van 48
POC-824 Series User Manual iv
9. Improper installation of a VESA mount can result in serious personal injury!
VESA mount installation should be done by a professional technician. Please
contact a service technician or your retail outlet if you need this service. The
detailed installation procedure is specified in Appendix A.
10. CLASSIFICATION:
1). Class I externally powered
2). No applied parts
3). Continuous operation
4). Not in the AP or APG categories
11. Environmental protection: follow national requirements to dispose of the unit.
12. Maintenance: to properly maintain and clean the surfaces, use only approved
products or clean with a dry applicator.
13. Make sure the user does not contact SIP/SOPs and the patient at the same
time.
14. When networking with electrical devices, the operator is responsible for ensur-
ing that the resulting system meets the requirements set forth by the following
standards:
– EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
– EN 60601-1-2 (IEC 60601-1-2)
Medical electrical equipment
Part 1-2: General requirements for safety
Collateral standard: Electromagnetic compatibility; Requirements and tests
15. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore, all configurations shall comply with the system standard IEC
60601-1. Anyone who connects additional equipment to the signal input part or
signal output part of a medical system is responsible to ensure that the system
complies with the requirements of the system standard IEC 60601-1. The unit is
for exclusive interconnection with IEC 60601-1 certified equipment in a patient
environment and IEC 60XXX certified equipment outside of a patient environ-
Caution! A battery charging indicator is not Included with this device. An indicator
can be added as part of the system assembly.
Warning! This device is not suitable for use in the presence of a flammable anes-
thetic mixture with air, oxygen, nitrous oxide, or as part of a life support
system.
Caution! When servicing the device, always use replacement parts that meet
Advantech standards. Advantech Medical cannot warrant or endorse
the safe performance of third-party replacement parts for use with our
medical devices.
Bekijk gratis de handleiding van Advantech POC-824, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | POC-824 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3874 MB |
